윈 도 우 aio ventoy 연동 오류 문의드려요~
2020.12.29 15:32
ventoy 최신버전 업데이트 전까지는 ventoy와 aio, grub4dos 연동하여 잘 사용해왔습니디.
환경은 ventoy 데이터 1파티션, ventoy efi 2파티션, aio 3파티션 구성입니다~
efi 환경에서는 잘 됩니다.
바이오스에서 aio 에서 ventoy 로 연결시 core.img 사용할 경우 문제가 발생합니다.
1. 기존 사용중인 예전에 얻었던 core.img 사용시 ventoy로 넘어가기는 하지만 이미지 실행시 vt_check_password 오류가 뜨고 실행이 안됩니다.
2. ventoy 1.0.31버전에 첨부된 최신 core.img 사용시 부팅이 아예 안되네요.
grub4dos 에서도 core.img 를 사용하여 ventoy로 넘어가도 마찬가지라 core.img 가 문제로 확인됩니다.
메인보드님의 vtldr 은 아래 스샷처럼 작동하지 않더군요.
하루종일 부팅하다가 포기상태입니다.
해결방법이 없을까 하여 질문글 올립니다~
댓글 [2]
-
한돼지 2020.12.29 16:12
-
늑대아니에요! 2020.12.29 19:52
500g usb를 ventoy로 500m 여유공간 할당하여 3분할후 aio설치하였습니다.
바이오스 부팅인 경우만 그렇습니다.
ventoy로 부팅해서 실행시는 잘되는데 aio로 넘어갔다가 ventoy로 넘어오면 안되네요.
마찬가지로 grub4dos로 넘어갔다가 ventoy로 넘어와도 안됩니다.
core.img 문제인거 같아요.
grub4dos-0.4.6a-2020-08-09 의 grldr 사용중입니다.
====================================
vtoefi파티션의 menu.lst 해당내용입니다.
title Ventoy Boot Menu 이동 (x86 MBR Boot) \n Ventoy Boot Menu 이동 (x86 MBR Boot)
find --set-root --ignore-floppies --ignore-cd /ventoy/core.img
kernel /ventoy/core.img
bootaio 파티션의 aio폴더의 menu폴더의 main.cfg 내용입니다. (aio파티션은 main.cfg 외에는 만질 필요가 없더군요)
### ************************************************************************************************
if [ "${grub_platform}" == "pc" ]; then
GetHotkey
menuentry "Ventoy (core.img)" --hotkey=${hotkey} {
if search -n -s -f /ventoy/core.img; then
multiboot /ventoy/core.img
else
echo "/ventoy/core.img NOT found"
fi
}
elif [ "${grub_platform}" == "efi" ]; then
GetHotkey
menuentry "Ventoy + bootx64_Ventoy.efi" --class=boot_uefi --hotkey=${hotkey} {
if search -n -s -f /efi/boot/bootx64_Ventoy.efi; then
terminal_output console
chainloader /efi/boot/bootx64_Ventoy.efi
boot
elif search -n -s -f /efi/boot/bootx64.efi; then
terminal_output console
chainloader /efi/boot/bootx64.efi
boot
else
echo "bootx64.efi or bootx64_Ventoy.efi or BOOTX64.EFI NOT found"
fi
}
fi
### ************************************************************************************************
if [ "${grub_platform}" == "pc" ]; then
GetHotkey
menuentry "GRUB4DOS MENU (x86 BIOS)" --class shield4 --hotkey=${hotkey} {
insmod ntldr
search --file /grldr --set=root
ntldr /grldr
}
elif [ "${grub_platform}" == "efi" ]; then
GetHotkey
menuentry "Grub4dos Boot Menu (Grub4dosx64.efi)" --class=boot_uefi --hotkey=${hotkey} {
if search -n -s -f /efi/boot/Grub4dosx64.efi; then
terminal_output console
chainloader /efi/boot/Grub4dosx64.efi
else
echo "Grub4dosx64.efi NOT found"
fi
}
fi
### ************************************************************************************************UEFI환경에서 grub4dos 의 EFI 부팅이 가능합니다.
ventoy나 aio에서 grub4dos-for_UEFI-2020-12-15 의 efi 파일 연결하면 grub4dos 부팅이 됩니다.
다만 menu.lst 로딩까지는 잘되는데 이미지실행이 안되네요.
ventoy와 AIO와 grub을 동시 사용해본 느낌입니다.
호환성 : ventoy < aio < grub4dos
UEFI만 가능한 메인보드면 aio와 ventoy 사용하면 되겠어요.
몇일전 최신버젼 ventory 1.03.1로 업데이트 ......
이후...
ventoy 에서 VHD와 wim 파일이 모두 사라지고 ...
다행이
AIO로 부팅하면 VHD와 wim 파일들이 있어요...
방법 문의 합니다......